Difference between revisions of "SociBot Mini Disassembly and Packing"
Line 3: | Line 3: | ||
[[Category: SociBot]] | [[Category: SociBot]] | ||
[[SociBot]] >> SociBot Desktop Disassembly and Packing | [[SociBot]] >> SociBot Desktop Disassembly and Packing | ||
− | =Introduction= | + | ==Introduction== |
Should you need to relocate your SociBot please contact Engineered Arts first for support. | Should you need to relocate your SociBot please contact Engineered Arts first for support. | ||
Should the robot need to be transported a greater distance than within your own building it should be disassembled and suitably packed. | Should the robot need to be transported a greater distance than within your own building it should be disassembled and suitably packed. | ||
− | |||
==Before packing== | ==Before packing== | ||
In software set the head looking straight (yaw, pitch and roll axes set to 180 degrees) | In software set the head looking straight (yaw, pitch and roll axes set to 180 degrees) |
Revision as of 14:51, 4 May 2016
This is a protected page.
SociBot >> SociBot Desktop Disassembly and Packing
Contents
Introduction
Should you need to relocate your SociBot please contact Engineered Arts first for support.
Should the robot need to be transported a greater distance than within your own building it should be disassembled and suitably packed.
Before packing
In software set the head looking straight (yaw, pitch and roll axes set to 180 degrees)
Original packaging
Please retain original packaging or flight cases (option) for safe and secure transportation of SociBot Mini.
Note the shape of the cut outs match SociBot's body. There is a cut out for the body and for the ears.
Neck support
Wrap bubble wrap and/or soft packing wrap around the neck to support the head
Secure SociBot in foam inserts
Wrap SociBot in soft foam to prevent damage to paintwork.
Note orientation of cut outs in foam inserts. Place insert on side. Position SociBot onto the insert.
Close the insert around SociBot, make sure fits closely.
Close the inserts at the rear with strong adhesive tape. Do not apply any tape to SociBot.
Place SociBot and accessories in box
With SociBot Mini facing up, insert into box.
Small rectangular block and longer piece of foam used to hold power supply and cables. Thin sheet of foam or bubble wrap on face. SociBot keys and setup instructions in bubble wrap bag in box.
Securely fasten box shut
Securely tape or bind the box closed before shipping.