Pages that link to "Template:Self"
Jump to navigation
Jump to search
The following pages link to Template:Self:
View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)- File:RoboThespian controlled by laptop - F12 for full screen.jpg (← links)
- File:RoboThespian supplied router for offline access with laptop.jpg (← links)
- File:RoboThespian controlled by laptop - URL in chrome or firefox.jpg (← links)
- File:RoboThespian router for offline access.jpg (← links)
- File:RoboThespian - connect Ethernet socket at feet.jpg (← links)
- File:RoboThespian controlled by laptop.jpg (← links)
- File:RoboThespian (optional) router for offline access - rear connections.jpg (← links)
- File:Ameca rear torso shell.jpg (← links)
- File:Ameca silicon removal - hold silicon as near as possible to popper - grip popper with nail.jpg (← links)
- File:Ameca rear torso shell - unplug cooling fan wiring to remove shell.jpg (← links)
- File:Ameca rear torso shell - remove 4 off Torx 20 screws.jpg (← links)
- File:Ameca rear torso shell - silicon un-poppered.jpg (← links)
- File:Ameca rear torso shell removed - note the cooling fan plug.jpg (← links)
- File:Ameca rear torso shell - NOTE cooling fan wiring.jpg (← links)
- File:Ameca upper arm outer trim - unscrew 3 off Torx 20 screws to remove.jpg (← links)
- File:Ameca upper arm - outer trim removed.jpg (← links)
- File:Ameca upper arm - unplug shoulder loom - squeeze clip at top of micro lock plug to release.jpg (← links)
- File:Ameca upper arm - unscrew p-clip retaining shoulder loom and black earth wire.jpg (← links)
- File:Ameca upper arm - p-clip removed.jpg (← links)
- File:Ameca upper arm - cut shoulder loom near shoulder. DO NO CUT the black earth wire or any other wires.jpg (← links)
- File:Ameca upper arm - note the single black earth wire with red plug - do not cut this.jpg (← links)
- File:Ameca shoulder loom and earth wire - path through shoulder - cable ties removed.jpg (← links)
- File:Ameca shoulder loom and earth wire - path through shoulder.jpg (← links)
- File:Ameca shoulder loom and earth wire - cut cable ties to separate from earth wire.jpg (← links)
- File:Ameca shoulder loom - pull out through shoulder - leave earth wire in place.jpg (← links)
- File:Ameca shoulder loom - release Micro Fit plug near neck motor driver board.jpg (← links)
- File:Ameca shoulder loom - path continues under neck motor driver board.jpg (← links)
- File:Ameca shoulder loom - path continues to USB distribution board.jpg (← links)
- File:Ameca shoulder loom - unplugged from USB distribution board.jpg (← links)
- File:Ameca shoulder loom - unplug Pico Lock from USB distribution board - press sides to release clip.jpg (← links)
- File:Ameca shoulder loom - release shoulder loom from P-clip near neck motor driver board.jpg (← links)
- File:Side cutters, Torx 20 driver, Cable ties, 1mm flat bladed screwdriver.jpg (← links)
- File:Ameca shoulder loom - tightly wrap cable with insulation tape at end of sleeving 1.jpg (← links)
- File:Ameca shoulder loom - tightly wrap cable with tape at end of sleeving 2.jpg (← links)
- File:Ameca shoulder loom with plug, insulation tape and string.jpg (← links)
- File:Ameca shoulder loom - tightly wrap a second piece of insulation tape around the crimps to hold together and form a narrow end.jpg (← links)
- File:Ameca shoulder loom - insulation tape forming narrow end.jpg (← links)
- File:Ameca shoulder loom - insulation tape in place.jpg (← links)
- File:Ameca shoulder loom - clove hitch knot 50mm from end.jpg (← links)
- File:Ameca shoulder loom - clove hitch knot 30mm from end.jpg (← links)
- File:Ameca shoulder loom - clove hitch knot 50mm from end - in place.jpg (← links)
- File:Ameca shoulder loom - 3 clove hitch knots in place.jpg (← links)
- File:Ameca shoulder loom - feed the loom through the shoulder.jpg (← links)
- File:Ameca shoulder loom - feed the string through the shoulder.jpg (← links)
- File:Ameca shoulder loom - loom fed through the shoulder 1.jpg (← links)
- File:Ameca shoulder loom - loom fed through the shoulder 2.jpg (← links)