Gallery of new files
Jump to navigation
Jump to search
This special page shows the last uploaded files.
- Ameca rear torso shell - remove 4 off Torx 20 screws.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 803 KB
- Ameca silicon removal - hold silicon as near as possible to popper - grip popper with nail.jpg Marcus
08:10, 12 December 2022
2,992 × 4,000; 384 KB
- Jun Air OF302-25M set robot pressure to 6 bar.jpg Marcus
16:34, 9 February 2022
4,000 × 2,992; 1.17 MB
- Jun Air OF302-25M Instructions inside compressor.jpg Marcus
16:33, 9 February 2022
2,992 × 4,000; 444 KB
- Jun Air OF302-25M Instructions, condensate container (bubble wrapped) and air line inside compressor.jpg Marcus
16:32, 9 February 2022
4,000 × 2,992; 933 KB
- Jun Air OF302-25M rear - hex standoffs fitted.jpg Marcus
16:24, 9 February 2022
4,000 × 2,992; 773 KB
- NUC breakout with audio default switch positions and labels.jpg Marcus
11:38, 27 January 2022
1,600 × 1,200; 533 KB
- KS-0023 serial plate location - legs - visible during shipping - close view rotated.png Marcus
13:03, 5 October 2021
569 × 422; 249 KB
- KS-0023 serial plate location - legs - visible during shipping - close view.png Marcus
13:02, 5 October 2021
425 × 559; 201 KB
- KS-0023 serial plate location - legs - visible during shipping.png Marcus
13:01, 5 October 2021
418 × 557; 315 KB
- Finger sleeve replacement - cut the spread end off old plastic sleeve.jpg Marcus
13:18, 16 September 2021
1,280 × 713; 127 KB
- Finger string attach cylinder rod end - 5mm gap.jpg Marcus
12:55, 16 September 2021
1,099 × 500; 93 KB
- Thread finger string step 1 - feed into wrist end.jpg Marcus
12:36, 16 September 2021
1,466 × 645; 230 KB
- Cut end of string at angle with sharp blade.jpg Marcus
11:31, 16 September 2021
4,000 × 2,992; 454 KB