Gallery of new files
Jump to navigation
Jump to search
This special page shows the last uploaded files.
- Show Controller - robot started up and connected.jpg Marcus
16:41, 28 January 2021
4,000 × 2,992; 357 KB
- Show Controller started up - waiting for robot.jpg Marcus
16:40, 28 January 2021
4,000 × 2,992; 760 KB
- Power Station - switch on - power indicator illuminates.jpg Marcus
16:02, 28 January 2021
4,000 × 2,992; 239 KB
- Power Station - check RCDs in on position - red indicators below.jpg Marcus
16:01, 28 January 2021
4,000 × 2,992; 297 KB
- Power Station - reset e-stop 2 - button pops out.jpg Marcus
15:59, 28 January 2021
4,000 × 2,992; 337 KB
- Show Controller - mains power cable connected.jpg Marcus
15:39, 28 January 2021
4,000 × 2,992; 450 KB
- Show Controller - LAN Port - internet access.jpg Marcus
15:37, 28 January 2021
4,000 × 2,992; 1.14 MB
- Show Controller - Robot ethernet port - connected.jpg Marcus
15:37, 28 January 2021
4,000 × 2,992; 828 KB
- Power Station optional external e-stop connection 3 - tighten retaining screws.jpg Marcus
15:09, 28 January 2021
1,600 × 1,197; 144 KB
- Power Station optional external e-stop connection 2 - insert.jpg Marcus
15:08, 28 January 2021
1,600 × 1,197; 134 KB
- Power Station optional external e-stop connection 1 - push in.jpg Marcus
15:08, 28 January 2021
1,600 × 1,197; 132 KB
- XLR in connector disconnect 3 - hold tab and disconnect.jpg Marcus
14:32, 28 January 2021
1,600 × 1,197; 186 KB
- XLR in connector disconnect 1 - tab location.jpg Marcus
14:31, 28 January 2021
1,600 × 1,197; 249 KB
- XLR out connector - disconnecting 2 - hold tab and disconnect.jpg Marcus
14:30, 28 January 2021
4,000 × 2,992; 1.4 MB
- XLR out connector - disconnecting 1 - press down tab.jpg Marcus
14:29, 28 January 2021
4,000 × 2,992; 352 KB
- XLR out connector - connecting - align and push in till locks in place.jpg Marcus
14:28, 28 January 2021
4,000 × 2,992; 1.16 MB
- PowerCON connector 3 - twist straight and release to lock.jpg Marcus
14:00, 28 January 2021
1,600 × 1,197; 456 KB
- Torso roll motor and encoder connection at waist.jpg Marcus
10:13, 1 July 2020
1,920 × 1,080; 580 KB
- Removing finger valve plugs - press on clip at rear.jpg Marcus
12:15, 8 April 2020
4,032 × 2,268; 320 KB
- Mesmer - fit jacket - bags on hands help slide on sleeves.jpg Marcus
16:32, 24 March 2020
3,024 × 4,032; 430 KB
- Mesmer - left arm mount with black spacer in place.jpg Marcus
15:38, 24 March 2020
4,032 × 2,268; 460 KB
- Mesmer - left arm unpacking - can leave protective tissue on.jpg Marcus
15:36, 24 March 2020
1,600 × 1,200; 357 KB
- Mesmer - left arm unpacking - protective foam layer.jpg Marcus
15:35, 24 March 2020
1,600 × 1,200; 169 KB
- Mesmer - gas strut mounting upper pivot - rear view.jpg Marcus
15:16, 24 March 2020
1,280 × 720; 97 KB
- Mesmer - right arm, mount with bracket vertical (nut facing to rear).jpg Marcus
13:05, 23 March 2020
1,600 × 1,200; 345 KB
- Mesmer - right arm unpacking - can leave protective tissue on for now.jpg Marcus
15:49, 20 March 2020
1,600 × 1,200; 348 KB
- Mesmer - right arm unpacking - protective foam layer.jpg Marcus
15:48, 20 March 2020
1,600 × 1,200; 233 KB
- Mesmer - connect Vrpi inside torso and feed Ethernet cable out of hole.jpg Marcus
15:13, 20 March 2020
1,280 × 720; 85 KB
- Mesmer - controller (Raspberry Pi) with shield removed.jpg Marcus
14:07, 20 March 2020
4,032 × 2,268; 376 KB