RoboThespian Standard Head Swap

RoboThespian >> RoboThespian Troubleshooting >> Standard Head Swap

Overview

The RoboThespian comes as standard with a hard shell head or can be swapped with a projector head version; this page will guide you through the process of replacing a standard head. You may want to replace the head if it has been damaged or if you are re-installing the standard head from a projector head.

Equipment required

To safely and easily replace the standard head you will need a few tools:

• 2.5mm Hex Allen Key
• 5mm Hex Allen Key
• Flat head screwdriver (I recommend a small blade, approximately 4mm wide and 0.8mm thick)
• Side cutters

[Pic here]