Difference between revisions of "RoboThespian Shut Down"
Line 42: | Line 42: | ||
# The robot is now turned off but it still has power so unplug the mains from the robots base | # The robot is now turned off but it still has power so unplug the mains from the robots base | ||
− | =Shutdown RoboThespian | + | =Shutdown RoboThespian using power button on NUC (mini PC)= |
− | # Should you need to, you can use the power button on the | + | # Should you need to, you can use the power button on the PC on the robot's back to initiate a shutdown. |
− | |||
<div><ul> | <div><ul> | ||
<li style="display: inline-block;">[[File:robot_pc_press_button_to_shut_down.JPG|thumb|none|400px|link=|Press power button to initiate shutdown]]</li> | <li style="display: inline-block;">[[File:robot_pc_press_button_to_shut_down.JPG|thumb|none|400px|link=|Press power button to initiate shutdown]]</li> | ||
Line 51: | Line 50: | ||
</ul></div> | </ul></div> | ||
+ | |||
+ | =Shutdown kiosk using power button on NUC (mini PC)= | ||
+ | # Should you need to, you can use the power button on the PC inside the kiosk to initiate a shutdown. | ||
<div><ul> | <div><ul> | ||
<li style="display: inline-block;">[[File:kiosk_pc_location.JPG|thumb|none|400px|link=|Kiosk PC location]]</li> | <li style="display: inline-block;">[[File:kiosk_pc_location.JPG|thumb|none|400px|link=|Kiosk PC location]]</li> |
Revision as of 15:51, 15 March 2019
This is a protected page.
RoboThespian >> RoboThespian Shut Down
Contents
Introduction
RoboThespian contains a PC and like any PC should be shut down fully before removing mains power.
This page explains how to shut down RoboThespian.
Before shutting down
If the robot is not in its resting position, then trigger the rest position from the COMPOSE screen
Shutdown using touchscreen
Access the administration section as detailed here
Under the 'System' tab in the Robot section press 'Shutdown' to shut down RoboThespian and the touchscreen kiosk. A message will confirm shutting down.
Earlier versions of the robot may require shutting down touchscreen and robot separately
Wait for RoboThespian to fully shut down - the LED on the computer on RoboThespian's back will turn off.
Please note that robot electronics will continue to run: eye screens will show a static graphic and (if fitted) body LEDs will continue to be illuminated
The touchscreen PC will close the interface, shut down and power itself off.
Switch off the mains power at the inlet or isolator
Shutdown RoboThespian using the Tritium GUI
You can shut down the robot through the Tritium GUI, this is especially useful if you are logged into the Tritium GUI already as you can shut down the robot remotely.
- If you are not logged into the Tritium GUI then log in to the Tritium GUI using your username and password associated with that robot, you can also log into the robot by clicking on its link through the robots.ea page
- If you are already logged in then shutdown the robot by first clicking on the serial number in the top left corner of the screen and then clicking the 'Shut down robot' in the bottom right corner of the screen
- The robot is now turned off but it still has power so unplug the mains from the robots base
Shutdown RoboThespian using power button on NUC (mini PC)
- Should you need to, you can use the power button on the PC on the robot's back to initiate a shutdown.
Shutdown kiosk using power button on NUC (mini PC)
- Should you need to, you can use the power button on the PC inside the kiosk to initiate a shutdown.