RoboThespian Quickstart
Quick Start Guide
Download this page as printable .pdf
Introduction
This is a very brief guide to rapid out of the box installation and operation of Socibot Mini .
Minimum Installation Requirements
RoboThespian Installation Overview & Requirements
Do's and Don'ts
Do maintain your RoboThespian to ensure it operates safely
Do switch off your RoboThespian if it is damaged or malfunctioning
Do treat your RoboThespian with care and respect
Don't allow visitors to touch RoboThespian
Don't disconnect any air or electrical connections while RoboThespian is switched on or has the compressed air supply connected
Don't use solvent cleaners or abrasive pads on RoboThespian
Don't make modifications or alterations to any settings without consulting the manufacturer first
Don't remove any covers to electrical components unless instructed to do so
Don't hotplug any cables. Shut down robot and disconnect mains power before plugging / unplugging any cable
1) Remove from boxes or (optional) flight case
2) Connect RoboThespian
3) Power on
4) Control your RoboThespian from the touchscreen kiosk
5) Access RoboThespian's Control Panel
When connected, Robothespian can also be accessed, controlled and settings can be modified via the network.
Please see http://wiki.engineeredarts.co.uk/Tritium_GUI for further details. Some example screenshots:
6) Shutdown procedure
RoboThespian contains a PC and like any PC should be shut down fully before removing mains power.
7) Explore further features
See http://wiki.engineeredarts.co.uk/Main_Page#Features and click on a feature to find out more
For more information and troubleshooting, please explore the links in the wiki, http://wiki.engineeredarts.co.uk/, or contact Engineered Arts if you can not find the information you are looking for in the wiki.
This is a protected page.