RoboThespian Installation Overview and Requirements
This is a protected page.
Contents
Overview
RoboThespian has a straightforward setup.
Setup Layout
Minimum Installation Requirements
- airline connection to robot is via an 8mm outside diameter Push-In-Fitting
- extra 8mm outside diameter polyeurethane tubing can be supplied on request
Base Dimensions
RoboThespian can also be installed directly onto a stage. For this application a low-profile version of the base is available. A hole in the base, allows cables to be neatly routed down into the stage. The robots DC power supply unit can also be located directly below him, we recommend a hole in the stage 150mm in diameter under the base.
Hole layout for feet - if mounting directly on own base / stage
Should you want to mount RoboThespian directly on your own stage or base, please use the following hold template:
Downloadable template here: 
Print template at 1:1 scale (i.e. do not scale to fit page when print). Check dimensions against a ruler before using.
Touchscreen kiosk Dimensions
The touch screen kiosk is the most common way in which visitors can interact with the robot. It also offers staff the ability to adjust settings and shut down the robot. For full details of the touchscreen functionality please see Touchscreen
Kiosk dimensions (for information only):
The kiosk is supplied with 5m of cabling to RoboThespian.
Base and Kiosk Colour Options
The bases and kiosks can be supplied as:
- light wood varnished (as in Setup Layout photo at top of page)
- black laminate
- white laminate
- grey laminate
Reference Stage Design
Downloadable drawing with recommended stage dimensions in pdf format:
Example Stage Areas
