Gallery of new files
Jump to navigation
Jump to search
This special page shows the last uploaded files.
- Tritium 2 Arbitration graph example arbitration tree dot.png GraphViz
09:04, 12 April 2024
828 × 347; 55 KB
- Tritium 1 Arbitration graph example arbitration tree dot.png GraphViz
09:04, 12 April 2024
828 × 347; 55 KB
- 2 7 2 3 Use tweezers to feed couple of mm into the sleeve at a time.jpg Marcus
11:21, 22 March 2024
1,345 × 1,009; 290 KB
- 2 7 2 2 Use tweezers to feed couple of mm into the sleeve at a time.jpg Marcus
11:21, 22 March 2024
1,446 × 1,084; 299 KB
- Head webcam mount position - as far back as possible.png Marcus
12:05, 11 January 2024
1,464 × 987; 391 KB
- Head shell mount standoff should all be 6mm long.png Marcus
12:03, 11 January 2024
1,502 × 979; 266 KB
- Torso shell mount brackets position at max height.png Marcus
11:28, 11 January 2024
863 × 651; 114 KB
- Mesmer-shoulder-D6-balance-system-gen-2-0012-onwards.drawio.png Rupert
14:33, 18 July 2023
1,485 × 802; 99 KB
- Ameca shoulder loom - original cable in same orientation as wiki pinout.jpg Marcus
12:11, 15 December 2022
996 × 1,330; 112 KB
- Ameca shoulder loom - loom fed through the shoulder 2.jpg Marcus
11:46, 12 December 2022
4,000 × 2,992; 419 KB
- Ameca shoulder loom - loom fed through the shoulder 1.jpg Marcus
11:46, 12 December 2022
4,000 × 2,992; 395 KB
- Ameca shoulder loom - feed the string through the shoulder.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 370 KB
- Ameca shoulder loom - feed the loom through the shoulder.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 536 KB
- Ameca shoulder loom - 3 clove hitch knots in place.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 224 KB
- Ameca shoulder loom - clove hitch knot 50mm from end - in place.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 480 KB
- Ameca shoulder loom - clove hitch knot 50mm from end.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 735 KB
- Ameca shoulder loom - clove hitch knot 30mm from end.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 358 KB
- Ameca shoulder loom - tightly wrap a second piece of insulation tape around the crimps to hold together and form a narrow end.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 475 KB
- Ameca shoulder loom - insulation tape in place.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 881 KB
- Ameca shoulder loom - insulation tape forming narrow end.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 447 KB
- Ameca shoulder loom with plug, insulation tape and string.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 878 KB
- Ameca shoulder loom - tightly wrap cable with tape at end of sleeving 2.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 254 KB
- Ameca shoulder loom - tightly wrap cable with insulation tape at end of sleeving 1.jpg Marcus
11:45, 12 December 2022
4,000 × 2,992; 374 KB
- Side cutters, Torx 20 driver, Cable ties, 1mm flat bladed screwdriver.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 475 KB
- Ameca shoulder loom - release shoulder loom from P-clip near neck motor driver board.jpg Marcus
09:30, 12 December 2022
4,000 × 2,992; 1.65 MB
- Ameca shoulder loom - unplugged from USB distribution board.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 1.23 MB
- Ameca shoulder loom - unplug Pico Lock from USB distribution board - press sides to release clip.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 617 KB
- Ameca shoulder loom - release Micro Fit plug near neck motor driver board.jpg Marcus
09:30, 12 December 2022
4,000 × 2,992; 868 KB
- Ameca shoulder loom - path continues to USB distribution board.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 1.63 MB
- Ameca shoulder loom - pull out through shoulder - leave earth wire in place.jpg Marcus
09:30, 12 December 2022
4,000 × 2,992; 736 KB
- Ameca shoulder loom - path continues under neck motor driver board.jpg Marcus
09:30, 12 December 2022
4,000 × 2,992; 1.87 MB
- Ameca shoulder loom and earth wire - path through shoulder - cable ties removed.jpg Marcus
09:30, 12 December 2022
4,000 × 2,992; 902 KB
- Ameca shoulder loom and earth wire - path through shoulder.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 903 KB
- Ameca shoulder loom and earth wire - cut cable ties to separate from earth wire.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 1.19 MB
- Ameca upper arm - note the single black earth wire with red plug - do not cut this.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 708 KB
- Ameca upper arm - cut shoulder loom near shoulder. DO NO CUT the black earth wire or any other wires.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 868 KB
- Ameca upper arm - unscrew p-clip retaining shoulder loom and black earth wire.jpg Marcus
09:30, 12 December 2022
3,000 × 4,000; 479 KB
- Ameca upper arm - unplug shoulder loom - squeeze clip at top of micro lock plug to release.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 1.36 MB
- Ameca upper arm outer trim - unscrew 3 off Torx 20 screws to remove.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 1.7 MB
- Ameca rear torso shell removed - note the cooling fan plug.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 227 KB
- Ameca rear torso shell - NOTE cooling fan wiring.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 1.51 MB
- Ameca rear torso shell - unplug cooling fan wiring to remove shell.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 762 KB
- Ameca rear torso shell - silicon un-poppered.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 1.12 MB
- Ameca rear torso shell - remove 4 off Torx 20 screws.jpg Marcus
09:30, 12 December 2022
2,992 × 4,000; 803 KB
- Ameca silicon removal - hold silicon as near as possible to popper - grip popper with nail.jpg Marcus
08:10, 12 December 2022
2,992 × 4,000; 384 KB
- Jun Air OF302-25M set robot pressure to 6 bar.jpg Marcus
16:34, 9 February 2022
4,000 × 2,992; 1.17 MB
- Jun Air OF302-25M Instructions inside compressor.jpg Marcus
16:33, 9 February 2022
2,992 × 4,000; 444 KB
- Jun Air OF302-25M Instructions, condensate container (bubble wrapped) and air line inside compressor.jpg Marcus
16:32, 9 February 2022
4,000 × 2,992; 933 KB
- Jun Air OF302-25M rear - hex standoffs fitted.jpg Marcus
16:24, 9 February 2022
4,000 × 2,992; 773 KB
- NUC breakout with audio default switch positions and labels.jpg Marcus
11:38, 27 January 2022
1,600 × 1,200; 533 KB
- KS-0023 serial plate location - legs - visible during shipping - close view rotated.png Marcus
13:03, 5 October 2021
569 × 422; 249 KB
- KS-0023 serial plate location - legs - visible during shipping - close view.png Marcus
13:02, 5 October 2021
425 × 559; 201 KB
- KS-0023 serial plate location - legs - visible during shipping.png Marcus
13:01, 5 October 2021
418 × 557; 315 KB