Difference between revisions of "SociBot Mini Disassembly and Packing"

From Engineered Arts Wiki
Jump to navigation Jump to search
m (Marcus moved page SociBot Disassembly and Packing to SociBot Desktop Disassembly and Packing without leaving a redirect: SociBot Desktop page)
Line 1: Line 1:
<accesscontrol></accesscontrol>
+
<accesscontrol>robot_user</accesscontrol>
[[Category: Set up]]
+
[[Category:User_Manual]]
 
[[Category: SociBot]]
 
[[Category: SociBot]]
[[Category:User_Manual]]
+
[[SociBot]] >> SociBot Desktop Disassembly and Packing
=Overview=
+
=Introduction=
 +
Should you need to relocate your SociBot please contact Engineered Arts first for support.
 +
 
 +
Should the robot need to be transported a greater distance than within your own building it should be disassembled and suitably packed. 
 +
 
 +
=Disassembly and Packing=
 
==Before packing==
 
==Before packing==
 
In software set the head looking straight (yaw, pitch and roll axes set to 180 degrees)
 
In software set the head looking straight (yaw, pitch and roll axes set to 180 degrees)

Revision as of 14:50, 4 May 2016

This is a protected page.

SociBot >> SociBot Desktop Disassembly and Packing

Introduction

Should you need to relocate your SociBot please contact Engineered Arts first for support.

Should the robot need to be transported a greater distance than within your own building it should be disassembled and suitably packed.

Disassembly and Packing

Before packing

In software set the head looking straight (yaw, pitch and roll axes set to 180 degrees)

Original packaging

Please retain original packaging or flight cases (option) for safe and secure transportation of SociBot Mini.

Note the shape of the cut outs match SociBot's body. There is a cut out for the body and for the ears.

SociBotMini Packing v2-01.jpg

Neck support

Wrap bubble wrap and/or soft packing wrap around the neck to support the head

SociBotMini Packing v2-02.jpg


SociBotMini Packing v2-03.jpg

Secure SociBot in foam inserts

Wrap SociBot in soft foam to prevent damage to paintwork.

Note orientation of cut outs in foam inserts. Place insert on side. Position SociBot onto the insert.

Close the insert around SociBot, make sure fits closely.

SociBotMini Packing v2-04.jpg

SociBotMini Packing v2-05.jpg

SociBotMini Packing v2-06.jpg


Close the inserts at the rear with strong adhesive tape. Do not apply any tape to SociBot.

SociBotMini Packing v2-07.jpg

SociBotMini Packing v2-08.jpg

Place SociBot and accessories in box

With SociBot Mini facing up, insert into box.

SociBotMini Packing v2-09.jpg


Small rectangular block and longer piece of foam used to hold power supply and cables. Thin sheet of foam or bubble wrap on face. SociBot keys and setup instructions in bubble wrap bag in box.

SociBotMini Packing v2-10.jpg

SociBotMini Packing v2-11.jpg

Securely fasten box shut

Securely tape or bind the box closed before shipping.

SociBotMini Packing v2-12.jpg