Difference between revisions of "RoboThespian part identification"
Jump to navigation
Jump to search
Line 29: | Line 29: | ||
The base connections consist of: | The base connections consist of: | ||
− | * Air | + | * Air Line connection (Must be a 6 bar air supply as per the [[RoboThespian Installation Overview & Requirements#Minimum Installation Requirements | minimum installation requirements]] ({{num|1}} in figure 4) |
+ | * Steel Base Plate (Older models may differ in design) ({{num|2}} in figure 4) | ||
+ | * Wired Network connection ({{num|3}} in figure 4) | ||
+ | * XLR audio connections in/out (Optional, see the [[TinMan Telepresence#Typical audio setup using XLR connections and TinMan Telepresence | TinMan Telepresence]] page for more information) ({{num|4}} in figure 4) | ||
+ | * RoboThespian Power Supply Unit, a local plug can be sourced for your region ({{num|5}} in figure 4) |
Revision as of 12:41, 17 April 2019
Introduction
RoboThespian is made of hundreds of parts, this page provides labelled diagrams for the most common components. Knowing what part is which will assist you in troubleshooting your RoboThespian.
Shells
The shells are shown in the diagrams below
The shells consist of:
- Face and Mouth shell ( in figure 1)
- Rear Head shell ( in figure 3)
- Front Torso shell ( in figure 1)
- Rear Torso shell ( in figure 2)
- Left and Right Arm shells ( in figure 1)
- Pants shell ( in figure 1)
Base connections
The connections for communication and powering your robot are located at the base
The base connections consist of:
- Air Line connection (Must be a 6 bar air supply as per the minimum installation requirements ( in figure 4)
- Steel Base Plate (Older models may differ in design) ( in figure 4)
- Wired Network connection ( in figure 4)
- XLR audio connections in/out (Optional, see the TinMan Telepresence page for more information) ( in figure 4)
- RoboThespian Power Supply Unit, a local plug can be sourced for your region ( in figure 4)