Difference between revisions of "RoboThespian Standard Head Swap"
Jump to navigation
Jump to search
(Created page with "Category:RoboThespian Category:RoboThespian Troubleshooting Category:Deprecated<br> RoboThespian >> RoboThespian Troubleshooting >> Standard Head Swap =Ove...") |
(→Overview) |
||
Line 4: | Line 4: | ||
[[RoboThespian]] >> [[RoboThespian Troubleshooting]] >> Standard Head Swap | [[RoboThespian]] >> [[RoboThespian Troubleshooting]] >> Standard Head Swap | ||
=Overview= | =Overview= | ||
− | The RoboThespian comes as standard with a hard shell head or can be swapped with a projector head version; this page will guide you through the process of replacing a standard head. You may want to replace the head if it has been damaged or if you are re-installing the standard head from a projector head | + | The RoboThespian comes as standard with a hard shell head or can be swapped with a projector head version; this page will guide you through the process of replacing a standard head. You may want to replace the head if it has been damaged or if you are re-installing the standard head from a projector head. |
+ | |||
+ | =Equipment required= | ||
+ | To safely and easily replace the standard head you will need a few tools: | ||
+ | |||
+ | * 2.5mm Hex Allen Key | ||
+ | * 5mm Hex Allen Key | ||
+ | * Flat head screwdriver (I recommend a small blade, approximately 4mm wide and 0.8mm thick) | ||
+ | * Side cutters | ||
+ | |||
+ | [Pic here] |
Revision as of 12:20, 27 February 2019
RoboThespian >> RoboThespian Troubleshooting >> Standard Head Swap
Overview
The RoboThespian comes as standard with a hard shell head or can be swapped with a projector head version; this page will guide you through the process of replacing a standard head. You may want to replace the head if it has been damaged or if you are re-installing the standard head from a projector head.
Equipment required
To safely and easily replace the standard head you will need a few tools:
- 2.5mm Hex Allen Key
- 5mm Hex Allen Key
- Flat head screwdriver (I recommend a small blade, approximately 4mm wide and 0.8mm thick)
- Side cutters
[Pic here]